Preparing/painting of yacht’s hull
H.P.W. Washing ( up to 350 bars ) of underwater area - 1050 m2
Spot hand scraping of ship’s underwater area - 30 m2
Rotobrushing by paper of ship’s underwater area - 30 m2
Painting 1 x T/U - 30 m2
Painting by hand roller 2 x F/C Antifouling 200 mic dry
2 x 1050 m2
Zinc anodes renewal total= 376 kgs
Propeller’s shafts 2 pcs works
Dismounting, inspection and installing back
Inspection/renewal of safety equipment as follows:
Signal rocket Albatros (liferaft ) - 16 pcs
Hand torch Albatros (liferaft ) - 24 pcs
Smoke alarm ( liferaft ) - 8 pcs
Packing tape RFD ( liferaft ) - 32 pcs
Glue for repair RFD ( liferaft ) - 4 pcs
Tape “Do not remove’’ ( liferaft ) - 48 met
Label “Surviva raft” - 4 pcs
Lifejacket challanger pressure test - 3 pcs
HRU Hammar H20 - 4 pcs
Shutter’s gasket for fire extinguisher - 27 pcs
Supplement N2 for fire extinguisher - 27 pcs
Protector for fire extinguisher - 1 pc
Light water - foam for fire extinguisher - 1ltr
Tanks cleaning
Preparing, chemical treatment, HPW washing, pumping out
of slop water as follows:
Sewage holding tank ( 11.4 m3 )
Mixing tank ( 4.4 m3 )
Grey water tank no. 1 ( 4.8 m3 )
Grey water tank no. 2 ( 7.2 m3 )
Grey water tank no. 3 ( 5.6 m3 )
Grey water tank no. 4 ( 3.4 m3 )
Fresh water tank PS ( 9 m3 )
Fresh water tank SB ( 9 m3 )
Fresh water tank AFT ( 14.6 m3 )
Bilge tank ( 2.9 m3 )
Pipe works
Bilge galvanized pipeline ND 50 length = 8000 mm ( 2 pcs )
Staging around hull total = 963 m3
Thermo welded plastic cover tent
( from waterline to the ground )
Mechanical works in the engine room, valves, pumps
and electric equipment overhauling.
https://www.brodotrogir.hr/hr/index.php/brodoremont/usluge/jahte/item/393-anna#sigProGalleriaf3b0e61471